EN 590 - 10 PPM - Gasoil

Key Properties EN 590 - 10 PPM Diesel Fuel

Key Properties of EN 590 Diesel Fuel

Sulfur Content: Maximum 10 mg/kg (or ppm) to reduce emissions and protect modern diesel particulate filters. 
Cetane Number: Minimum 51, indicating good ignition quality. 
Fatty Acid Methyl Ester (FAME) Content: A mandatory blend, typically up to 7% by volume, although national legislation can vary. 
Density: Between 820–845 kg/m³ at 15°C. 
Viscosity: 2.0–4.5 mm²/s at 40°C, ensuring proper lubrication. 
Flash Point: A minimum of 55°C, indicating fuel safety. 
Carbon Residue: Maximum 0.3% on the 10% distillation residue. 
Water Content: Must not exceed 200 mg/kg to prevent corrosion and microbial growth. 
Lubricity: A maximum wear scar diameter of 460 µm (HFRR) to protect fuel injection systems. 
Purpose and Use
Automotive Use: EN 590 is the standard for road diesel, used in passenger cars, lorries, vans, and road-going agricultural vehicles. 
Environmental Performance: The ultra-low sulfur content significantly reduces harmful emissions from diesel engines. 
Engine Compatibility: The specification is designed for modern diesel engines, particularly those meeting Euro 6 standards. 
Seasonal Considerations 
The specification includes different Cold Filter Plugging Points (CFPP) for summer and winter grades to prevent fuel gelling in cold temperatures. Winter grades require lower CFPPs, with specific regional requirements.

Key Properties

  • Optimized Engine Performance

    The ultra-low sulfur content minimizes the risk of deposit formation, allowing fuel injectors and engine components to operate at peak efficiency. This results in smoother engine operation, improved responsiveness, and sustained power output.

  • Enhanced Fuel Efficiency

    By enabling a more complete and efficient combustion cycle, this fuel helps to extract the maximum amount of energy from every drop. This leads to measurable improvements in fuel economy, reducing operational costs for commercial and industrial users.

  • Superior Environmental Compliance

    This fuel meets the stringent Euro V/VI emissions standards. Its clean-burning properties drastically reduce emissions of sulfur oxides (SOx) and particulate matter (PM), making it an environmentally responsible choice for modern diesel engines equipped with advanced after-treatment systems like Diesel Particulate Filters (DPF).

  • Maximum Engine Protection

    The purity of EN 590 - 10 PPM Gasoil protects sensitive fuel system components from corrosion and wear. This extends the life of the engine, reduces maintenance frequency, and ensures long-term operational reliability.

"Our products carry the seal of quality."

To contact us and purchase our products, follow these steps:

1. Download the KYC form ,

2. Fill out the necessary information, scan it or take a photo

3. Upload the file using the form below or write to us at info@borderbrie.com attaching the file.

Contact Us Anytime

If you need advice, you can write to us to resolve your queries.

Get In Touch

 management@unitedtradewd.com

Legal Notice | Cookie Policies | Privacy Policy

© 2025 United Trade Development